MVS-31 Order Page

The MVS-31 is a tabletop chamber sealer used for vacuum-packaging. Vacuum packing food for sous vide cooking has never been so easy.

The mvs-31 incorporates a seal and cut system that makes packaging food for cooking in a water bath quick and simple.

The pressure sensor automatically adjust to large and small packages without the need to practice on packages in order to find the sweet spot like other machines.

All the MINIPACK-TORRE vacuum machines are made of Stainless Steel AISI 304 according to CE standards. The volumetric electronic sensor assures a steady control of vacuum and gas packaging. All the machines have a digital, low voltage control panel, 9 storable programs and a special device for the external vacuum. High density polyethylene plates to reduce chamber volume are supplied with the machine. The machines are equipped with a new waterproof flat switch membrane board. ain content text

FEATURES

• Stainless steel (AISI 304)
• Vacuum cycle stop
• Bags waste film cut
• Aluminum sealing bar
• Digital panel with
• 9 storable programs
• Electronic volumetric sensor
• High density plates
• Transparent lid
• Auto-calibration
• Security for over-current on sealing bar
• Oil level check signal
• CE certification

Technical features

• Power supply 115V/9A
• Sealing Bar Length 12.05 inches
• Vacuum pump .25hp-6m3/h
• Chamber dimensions 12.75"x11.75"x6" including the domed lid
• Machine dimensions with lid open 15.35" x 18.89" x 27.55" (Inches)
• Machine dimensions with lid closed 15.35" x 18.89" x 14.25" (Inches)
• Machine Net weight 72.75 Lbs.

Warranty: One year limited warranty on non-wear item parts.

Our price on the MVS 31 our price is $1950

The purchase price also includes membership to the members only area where you will learn from our videos ($147 Value )

Options and Accessories for the MVS-31:

Voltage:
The standard machine is 115V and ships ready to plug in. 220 volt is an option for an additional $153. If you order this machine in 220 volt you will need to wire the plug for your local connection.

Gas Flush:
The machine can be ordered with gas flush option for an additional +$258. Gas Flush allows you to remove the air in the chamber, then inject a gas like nitrogen back into the package before it is sealed shut. The gas that gets inserted into the bag prevents delicate items like potato chips from being crushed by the bag. On most of the other chamber machines you need to make this decision when the machine is ordered. With the MVS units you can order this at a later date if needed.

Sealer Bar Options:

The standard configuration of the sealer bar is a 4mm sealing strip and a bag cut off wire.

The seal bar can be changed to fit your needs for an additional +$88.

"I have found the standard seal bar configuration with the 4mm and the bag cutter to work very well for sous vide cooking. This feature has saved me two steps and a lot of time over the way I had to do things with my previous chamber sealer.", Roger Seher

Stainless Steel Slant Tray for liquids:
The adjustable slant tray makes it easier to pack liquid items like soups and sauces. It is rugged and easy to clean. +$197 (you can see this in one of the videos )

Special Shipping Required
This chamber sealer is very heavy, and contains oil for the vacuum pump. To ensure it arrives safely and ready to use, it must be shipped on a pallet to your location. The amount shown in the FREIGHT QUOTE NEEDED section of your order is only an estimate. We will contact you by phone with the actual freight charges prior to processing your order.

 You can order online, just select freight quote needed for shipping. Once we receive your order, we will call you with a free quote to your location before we run the credit card so you will know exactly what you will be spending.

Why do I need a freight Quote?
Chamber sealers are very heavy, and they contain vacuum pump oil. They must be boxed and shipped security fastened to a wooden pallet and delivered by freight truck. If we were to try to ship a chamber sealer any other way. It would more than likely be damaged upon arrival to your location.

Can I order by phone?
Sure, just give us a call at 602-910-6478, and tell us what other items you'd like shipped along with ayour chamber sealer.
We will take that information, along with your address and provide you with a quote for both the machine bags and shipping.

Can I request a free quote even at 3 AM?
Sure, just use the contact form located at www.AskRogerSeher.com include what model chamber sealer you're interested in along with your shipping address and contact information. We will then respond to requests the following day.